View IHB100T480515_1254297.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Corporate: www.cdtechno.com Product: www.cdpowerelectronics.com
IHB100T
100 Watt Triple Output Half Brick DC/DC Converter
33 - 75V Input Range Each Channel Independently Current Limited High Efficiency: 88% Typical 1500VDC Isolation Between Input and Output Operation to 100C Baseplate Temperature 50S Transient Recovery, 0-90% Load Step Primary & Secondary Remote On/Off IHB100T Series Approved to UL/CUL 1950, EN60950
The IHB100T series triple output standard half brick modules are designed for today's demanding industrial applications. Available in two wide range inputs, these isolated converters offer many features in the standard models. With a complement of safety agency approvals and low noise operations, the converters respond extremely fast to change in load conditions. Inherent in the design are very well-controlled output voltage and minimal need for minimum loading on main (V1) output.
PRODUCT SELECTION CHART
INPUT VOLTAGE MODEL IHB100T480312 IHB100T480315 IHB100T480512 IHB100T480515 (VDC) 48 (33-75) 48 (33-75) 48 (33-75) 48 (33-75) V1 () 3.3 3.3 5.1 5.0 RATED VOUT (VDC) V2 () 12 15 12 15 V3 () 12 15 12 15 RATED MAXIMUM IOUT (A) V1() 30 30 20 20 V2() 4.2 3.4 4.2 2.0 V3() 4.2 3.4 4.2 2.0
ABSOLUTE MAX. RATINGS
Output Short-Circuit Duration Baseplate Temperature Continuous +100C
EFFICIENCY vs TEMPERATURE
TCASE = +40C, nominal input voltage, nominal load, recommended external components applied, unless otherwise specified.*
Change in Efficiency (%)
Lead Temperature (soldering, 10 seconds max) +300C Storage Temperature Input to Output Isolation +125C 1500 VDC
Case Temperature (C)
SPECIFICATIONS, ALL MODELS
Specifications are at TCASE = +40C nominal input voltage unless otherwise specified.
PARAMETER CONDITIONS
Peak - Peak DC to 1KHz Output Power = 100W VIN = 30V POUT = 0, VIN, MinMIN
33 50
TYP
48 60
MAX
75 370
UNITS
VDC mA dB A W mC mA mA
INPUT
Voltage Range Reflected Ripple Current Input Ripple Rejection Maximum Input Current No Load Power Dissipation Inrush Charge Quiescent Operating Current Primary On/Off Disabled Secondary On/Off Disabled
5 6 0.247 7.5 15 10 20
PARAMETER
ISOLATION Input to Each Output Input to Baseplate Channel to Channel Resistance, Input - Output Capacitance, Input - Output Leakage Current GENERAL Set Point Accuracy Turn-on Time Remote On/Off Control Inputs Primary Sink Current-Logic Low Vlow Vhigh Secondary Sink Current-Logic Low Vlow Vhigh External Synchronization Input Frequency Pulse Width Source Impedence Input High Voltage Input Low Voltage Input Impedance Switching Frequency Weight TEMPERATURE Operation/Specification Storage Shutdown Thermal Inpedance
CONDITIONS
Peak Test Any Channel to Any Channel
MIN
1500 1500 500 10
TYP
MAX
UNITS
VDC VDC VDC M pF A, rms
VISO = 240VAC, 60Hz VIN = Nominal, 50% Load Within 1% of Nominal VOUT Open Collector/Drain VIN = VMAX
2000 180 1 5
3.5
% mSec
GENERAL
7 0.8 Open Collector 100 0.4 Open Collector 440 150 4 0 470 470 480 520 320 47 5 1 490 3 (85) +100 +125 +115 8.2
mA V
Open Collector/Drain A V
KHz nSec V V KHz oz (g) C C C C/W
Case Temperature -40 -55 +100 Case to Ambient
PARAMETER
Output Power
CONDITIONS
Total Combined O/P Power = 100 Watts Max IO Nom
V1
Min Nom 50 3.3 15 100 .02 Max 100 30.0 200 3.80 .05 0.10 1.00 0 Min
V2
Nom 25 12.2 2.1 150 .02 Max 50 4.2 0 500 Dependent on V1 .05 Min
V3
Nom 25 12.2 2.1 150 .02 Max 50 4.2 500 .05
UNITS
W V A mV V %/C % % A A mV Sec V %
IHB100T480312 OUTPUT
Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency
0.5 DC to 20MHz*
*
VIN, MinVINVIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load 50 to 100% Load Step VOUT, 1% of VOUT, Nom IOUT1=15A, (IOUT2+IOUT3)= 4.2A F.L. VIN=Nominal
3.15
0.05 0.50 38 30 150 35 4.2 85 86
1.0 2.0 See Regulation Curves 6.0 5.0
1.0 2.0 See Regulation Curves 6.0 5.0
38 250 50 5.0
6.0
6.0
* See Application Notes available on the web at www.cdpowerelectronics.com
Product: www.cdpowerelectronics.com
IHB100T REV A 10/01
2
SPECIFICATIONS, ALL MODELS
Specifications are at TCASE = +40C nominal input voltage unless otherwise specified.
PARAMETER
Output Power
CONDITIONS
Total Combined O/P Power = 100 Watts Maximum IO Nom
V1
Min Nom 50 3.3 15 100 .02 Max 100 30.0 200 3.80 .05 0.10 1.0 38 250 50 5.0 0 Min
V2
Nom 25 15.85 1.66 125 .02 Max 50 3.33 0 500 Dependent on V1 .05 Min
V3
Nom 25 15.85 1.66 125 .02 Max 50 3.33 500 .05
UNITS
W V A mV V %/C % % A A mV Sec V %
IHB100T480315 OUTPUT
Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency
0.5 DC to 20MHz* * VIN, MinVINVIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load 50 to 100% Load Step VOUT, 1% of VOUT, Nom IOUT1=15A, (IOUT2+IOUT3) = 3.4A F.L. VIN=Nominal 4.2 85 3.15
0.05 0.50 38 30 150 35 86
1.0 2.0 See Regulation Curves 5.0 4.0 5.0
1.0 2.0 See Regulation Curves 5.0 4.0 5.0
PARAMETER
Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency
CONDITIONS
Total Combined O/P Power = 100 Watts Combined IO Nom
V1
Min Nom 50 0.5 5.1 10 100 4.75 .02 Max 100 20 150 5.50 .05 0.10 1.0 26.0 300 50 7.0 0 Min
V2
Nom 25 12 2.1 150 .02 1.0 Max 50 4.2 0 Min
V3
Nom 25 12 2.1 150 .02 1.0 Max 50 4.2 500 .05 2.0
UNITS
W V A mV V %/C % % A A mV Sec V %
IHB100T480512 OUTPUT
DC to 20MHz* * VIN, MinVINVIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load 50 to 100% Load Step
500 Dependent on V1 .05 2.0
0.05 0.50 26.0 20.0 200
See Regulation Curves 6.0 5.0 6.0
See Regulation Curves 6.0 5.0 6.0
VOUT, 1% of VOUT, Nom IOUT1=10A, (IOUT2+IOUT3) = 4.2A F.L. VIN=Nominal 6.0 86
35 87
PARAMETER
Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency
CONDITIONS
Total Combined O/P Power = 100 Watts Max IO Nom
V1
Min Nom 50 0.5 5.0 10 100 4.60 .02 Max 100 20 150 5.50 .05 1.0 1.0 26.0 300 50 7.0 0 Min
V2
Nom 25 15.3 1.66 125 .02 Max 50 3.33 0 Min
V3
Nom 25 15.3 1.66 125 .02 Max 50 3.33 500 .05
UNITS
W V A mV V %/C % % A A mV Sec V %
IHB100T480515 OUTPUT
DC to 20MHz* * VIN, MinVINVIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load 50 to 100% Load Step
500 Dependent on V1 .05
0.05 0.05 26.0 20.0 200
1.0 2.0 See Regulation Curves 5.0 4.0 5.0
1.0 2.0 See Regulation Curves 5.0 4.0 5.0
VOUT, 1% of VOUT, Nom IOUT1=10A, (IOUT2+IOUT3) = 4.2A F.L. VIN=Nominal 6.0 86
35 87
* See Application Notes available on the web at www.cdpowerelectronics.com
Product: www.cdpowerelectronics.com
IHB100T REV A 10/01
3
MECHANICAL
SIDE VIEW
PIN SIDE DOWN
PIN CONNECTIONS
1 2 3 4 5 6 7 8 9 10 11 12 PRIMARY ON/OFF -VIN +VIN SYNC IN -V2 +V2 TRIM +V1 -V1 SECONDARY ON/OFF +V3 -V3
PIN SIDE UP
NOTES: All dimensions are in inches (millimeters). PIN PLACEMENT TOLERANCE: 0.005" MECHANICAL TOLERANCE: 0.015" Marked with: specific model ordered, date code, job code. MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance and electrical properties in high humidity environments and over a wide operating temperature range. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is solder plated to allow ease of solderability.
C&D Technologies (Power Electronics) Ltd. Shannon, Co. Clare, Ireland Tel: +353.61.474.133 Fax:+353.61.474.141
Power Electronics Division, United States 3400 E Britannia Drive, Tucson, Arizona 85706 Tel: 800.547.2537 Fax: 520.770.9369
C&D Technologies, (NCL) Milton Keynes MK14 5BU UK Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545
Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user's intended purpose and in user's specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace applications.
Product: www.cdpowerelectronics.com
IHB100T
REV A
10/01
4

▲Up To Search▲

Price & Availability of IHB100T480515

	To Download IHB100T480515 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .